Aeroseal Duct Sealing for Connecticut Homes
Aeroseal duct sealing closes leaks in your ductwork from the inside, without tearing open walls or ceilings. Call The Bee seals ducts for homeowners throughout Connecticut, from older colonials with ducts snaking through unfinished basements to Cape Cods with runs tucked into attics that bake in summer and freeze in winter. If some rooms never feel right, your energy bills keep climbing, or dust comes back days after you clean, leaky ducts are a likely cause.
ENERGY STAR estimates that the typical duct system loses 20 to 30 percent of the air moving through it. That air is paid for twice: once when your furnace or air conditioner conditions it, and again when the system runs longer to make up the difference. In a Connecticut winter, that adds up fast on an Eversource or UI bill.
How Aeroseal Seals Ducts From the Inside
Traditional duct sealing means reaching each joint by hand with mastic or foil tape. That works for exposed ducts, but most ductwork in a finished home is hidden behind drywall, inside floor cavities, or above ceilings. Aeroseal reaches those leaks without demolition.
What happens during an Aeroseal visit
- Prep and protection: Our technician covers registers and isolates your furnace, air handler, and coil so sealant only travels through the duct runs.
- Before measurement: The system pressurizes your ducts and measures exactly how much air is leaking.
- Sealing: A fine aerosol sealant is blown into the pressurized ducts. As air escapes through gaps and holes, the particles collect at the edges and build up until each leak closes. Leaks up to about 5/8 of an inch can be sealed this way.
- After measurement: You get a report showing leakage before and after, so you can see the result in numbers instead of taking our word for it.
Most homes are done in a single day. Once the registers are uncovered and equipment is reconnected, your heating and cooling go right back to work.
Signs Your Ductwork Is Leaking
Leaky ducts rarely announce themselves. Instead, they show up as small, frustrating problems that are easy to blame on something else:
- Upstairs bedrooms that stay hot in July and cold in January
- Rooms farthest from the furnace with weak airflow at the registers
- Heating or cooling bills that rise year over year with no change in habits
- Dust that settles quickly on furniture, even with a good filter
- Musty or attic smells when the system kicks on
- A furnace or AC that seems to run constantly
Leaks on the return side of a duct system are especially worth fixing. Returns pull air back toward the equipment, so a leak in a basement, crawl space, or attic can draw in dust, insulation fibers, and humid or musty air, then spread it through every room.
Why Duct Sealing Matters in Connecticut
Connecticut puts duct systems through a lot. Winters bring long heating seasons, and summers along the shoreline and in the river valleys bring heavy humidity. Many homes across the state were built decades before tight ductwork was a priority, and joints loosen over years of expansion, contraction, and settling.
Ducts that run through unconditioned spaces lose the most. A leak in a 20-degree attic in February is heating the attic, not your living room. A leak in a damp basement in August pulls in moisture your air conditioner then has to remove. Sealing those gaps keeps conditioned air where you want it and keeps unconditioned air out.
Benefits of Aeroseal Duct Sealing
More even temperatures
When air stops escaping along the way, more of it reaches the rooms at the end of the line. Homeowners often notice the difference first in upstairs bedrooms and additions.
Lower energy use
Your heating and cooling equipment no longer has to run extra cycles to make up for lost air. That means less wear on the system and less waste on your monthly bill.
Cleaner indoor air
Sealed ducts stop pulling dust, fibers, and crawl space or attic air into the airstream. Aeroseal pairs well with professional duct cleaning, which removes buildup that is already inside the ducts before the leaks are closed.
Better performance from new equipment
A new furnace or air conditioner can only perform as well as the ducts it connects to. If you are planning an upgrade through our heating services or air conditioning services, sealing the ducts first helps the new system deliver what it is rated to deliver.








